Tag Archives: alaska

Fall Colors

img_0665-2 img_0657-2 img_0652_moment

mountains in fallI would enjoy the beauty of this time of year more, I think, if it didn’t make me so sad to realize its almost over.

Backhoe’s still in the shop, we’re making due with what we have.

img_0648-3

Besides, it means I get to spend a lot of time in the digsite manning the excavator. I love looking for big rocks, bedrock, clay layers and other things that spell good gold.  Every layer is a new possibility.  See that smile?

I have to be careful to pay attention and not get a huge overhang going, its easy to get to excited about a bedrock ledge or something and undercut too much.  Occasionally we have to knock it in.  Here’s a little video, I just love that slow motion feature on the iphone.

We’re almost to the little anomaly we saw on the mag survey, looks like we will have to move the caution fence soon!

img_0655_moment-2

All was well, until, you guessed it, we broke something.  A sharp piece of slate hiding in the mud popped a hole in the sidewall of the dumptruck tire.  Quite the sound it made.

img_0697-2 img_0675-2

Turned out we had to take off for a wedding so we had to clean out earlier than we normally would.  But the results weren’t bad.  Even found a few nice pickers, must have been under that big rock I was digging at.
img_0692-2

 

IMG_0572img_0693-2

 

 

 

 

 

 

Just the two of us

mountains

The leaves are starting to turn, and thus begins the bittersweet chapter of mining season.  With the kid back in school, and most of the rest of our crew gone, its up to just my husband and I to save what’s left of the season.  Thanks to grandma for getting the kid to school during the week, we are able to work as long as we have daylight, skip lunch, and get up early.

Mining in the fall is not so bad; less bugs, more bears.  Though we haven’t seen a bear yet this season (knocking on wood).

little dump truck

The backhoe is still in pieces at the mechanic’s shop, but we simply couldn’t wait anymore.  Time to try out the little dump truck that we’ve had for a while but never taken up to the mine.

It takes a little longer because we  first have to use the excavator to load the truck from the dig site. Second, stockpile the stuff at the washplant. Then third, drive the excavator back over to load the washplant. But it worked pretty well.  In fact, we might make this truck part of the process for next season and save the miles on the backhoe.

Also, thankfully, we finally got the report from the geologist on the magnetometer survey.  There are a lot of very promising prospects including possible some bedrock source gold.  I think I’m going to work on the permits to expand the place we were testing last time, as the report agreed with our test results.  We really can’t tell anymore about this spot until I get permission to clear some trees and make some road improvements.  In the meantime, there’s a couple of small hotspots we’re headed towards at in our current digsite that we hope to break through too soon.

IMG_0572

I’ve been fighting with this dang rock for days with the excavator, but I bet it’s where the gold is coming from.  I’ll get it soon.

black mat IMG_0620 (2)

Pretty good results, less than usual because the process is a little slower, but better some gold than none.

Also more of the crystaline gold in this cleanout.

Testing, Testing, 1, 2, 3

With the backhoe still in the shop, we decided to make the most of the downtime and test one of the hot spots that showed up on the magnetometer survey.  Its important that we know where we are aiming for next season, so I can start working on the permitting this winter.

We’ve had our eye on this spot since we bought the place.  We call it 700, named after the rumor that a previous owner got 700 ounces in one small spot somewhere on our claims.  We don’t know where he found it, or if this is really true, but we’ve always joked that OUR 700 ounces would be found here.  Its a natural drainage down into the canyon from up hill.

Problem is, there’s so much water and muck coming down this area that it stays frozen through much of the spring. Then, when it thaws, it turns into a soupy mess that’s easy to get equipment stuck in.  However, it turned out to be one of the largest hot spots on the survey that we can easily access, so we decided to revisit it.  Imagine, all that money we invested in the magnetometer survey only to find out what we already knew!

IMG_0463 (2)

 

 

 

 

 

 

 

 

 

We got the excavator in there, sure enough, it’s just as I remember.  Wet, muddy, clay ridden material.  Dug as deep as we could and panned a sample.

IMG_0466 (2)

 

 

 

 

 

 

 

 

 

We found a few colors, so, decided to run a few buckets.

IMG_0615 (2)

 

 

 

 

 

 

 

 

 

Honestly, it was fun to work this way.  It reminded me of the old days when we first started out. Shoveling, filling buckets, and being thrilled with the smallest amount of gold.  In the evening we we’re the kind of tired that only comes from a long day of physical activity.

IMG_0485 (2)

 

 

 

 

 

 

 

 

 

Pleased with the bucket test, we loaded the small pickup size dump truck and got a few yards up to the trommel.  It was slow-going to run, the wet material didn’t want to go through the grizzly, but we were pleased with the results.  The gold seems larger and in more concentration than our current digspot.  700 is definitely a contender for next season.

IMG_0478 (2)

Karma Points

As July comes to a close, I’m not super happy about the yellow leaves falling from the trees and the fireweed nearing the top.  I keep reminding myself that its only August, there is still time…

Been a busy week at the mine, still getting better results than we ever have thanks to our addition of more water to the trommel.

gold in quartz

 

 

 

 

 

We are also excited to see more and more gold in quartz, for those of you that don’t know, this usually is a sign that it didn’t travel very far from the source vein.

back to the shopfixing belt

But of course, its mining, so we have to break something.  First we shredded one of the belts turning the trommel, spent a few hours replacing them, only to shred them again.  Looks like we’ll need to do a little more investigation as to why.

IMG_0435 (2)

 

AND just for good measure, we went ahead and locked up the breaks on the backhoe, back to the shop.  Again.

magsurvey

 

 

 

 

 

 

Its not all doom and gloom though, results of our mag survey have started coming in. I don’t want to bore you with a bunch of scientific terms, basically this shows hot and cold (high and low) magnetism. The pink areas indicate that there’s a lot of black sand (and thus hopefully gold).  We are currently doing better than we ever have and we are only in a red zone.

Though I hate to pull the excavator away from the washplant when we are making good gold, we really need to focus on following up this survey data with test pits, that way I can work on the permits for next year.

fish rescue

Lastly, here is dad coming to the rescue of some poor stranded little fish fry that our daughter found.  Maybe we’ll get some Karma points for that.

 

 

 

 

Let’s get some SCIENCE up in here!

Here’s hoping all of you had a great Independence Day or Canada Day!

Big stuff happening at the mine.  I may have mentioned that we were looking into getting a magnetometer survey done.  We just finished it up and are looking forward to the results.

Just in case you don’t know, basically a magnetometer survey will show us where there are concentrations of black sand, and where there’s black sand, there is usually…..GOLD.

We have 160 acres of claims, we realized that we could spend the next 30 years digging test holes and never find the best stuff.  Also because of the terrain and the Forest Service regulations we can’t have a drilling program.  The magnetometer was our best bet.  Now, to find someone to do it!

Turned out that most companies were not really interested in a small job like ours, they would either not answer me at all or set the price so high that it was unrealistic.  Then, I ran across an article about Pioneer Exploration out of Canada being the first outfit to do a Magnetometer Survey with a Drone system that they designed themselves.  I figured a place like that wouldn’t give me the time of day; but their founder, Micheal Burns, wrote me right back, and on a Sunday no-less. They gave us a reasonable quote, and we set a date.

It was decided that the best way to do the survey was on foot with a backpack magnetometer.

Michael Burns getting geared up

Michael Burns getting geared up

 

 

 

 

 

 

 

 

 

 

 

These guys walked a 20 meter spaced grid over the entire 160 acres through some of the of the most unforgiving terrain imaginable.   They got stung by hornets, had to repel across the creek, walked straight up and down in some places, and had no bear protection whatsoever.  They were supposed to take seven days to do it. They did it in four.

As you can tell, we are thrilled to have found these guys!  I can’t wait to see the data they come up with.